Our Industry

TEG Cleanout Case Study

By Croft Productions / June 30, 2020 / 0 Comments

Most customers dread having to conduct a full cleanout of a TEG dehydrator. The cleanout sometimes implies shutdowns or drop in capacity. One of the ways CROFT designed the Passive Dehydration System (PDS) is to be utilized as a quick, easy, and a temporary way to bypass a TEG and continue to dehydrate the gas while your TEG is shut down and getting serviced/cleaned out.

Read More

Webinar| Saving Money in Operations: Challenges in Oil and Gas

By Croft Productions / June 13, 2020 / 0 Comments

In this series we’re going to be interviewing a lot of subject matter experts, bringing them on, they’re going to be talking from their perspectives of what do they see are key things that we need to focus on.

Read More

CIS 30MM Case Study

By Croft Productions / June 1, 2020 / 0 Comments

The CIS 30 MM model. This system was designed to have different static mixers to create enough turbulence and increase contact time without creating too much of a pressure differential. It has a modified two-phase separator to act as a bubble tower for efficient use of the chemical while providing proper separation.

Read More

Frequently Asked Questions | enviroDRI

By Croft Productions / May 5, 2020 / 0 Comments

CROFT Passive Dehydration Systems use a specially formulated solid desiccant called enviroDRI to adsorb water from the gas stream. Below are our clients’ most commonly asked questions about enviroDRI. What is envirodri? enviroDRI is a deliquescent desiccant pellet about the size of an almond designed to adsorb water from hydrocarbon streams. It was developed by […]

Read More
drilling rig fuel processing

Natural Gas Driven Drilling And Hydraulic Fracturing

By Cameron P. Croft / March 17, 2020 / 0 Comments

Dual Fuel Powered Drilling Rigs and Frac Spreads Many cost-conscious oilfield companies have made the switch to either natural gas or dual-fuel, also referred to as bi-fuel, which is a mixture of diesel and natural gas. Dual-fuel engines run on a combination of diesel and natural gas, giving companies the flexibility to choose which fuel […]

Read More
oil and gas storage tanks

What is an Oilfield Storage Tank?

By Cameron P. Croft / February 7, 2020 / 0 Comments

Oil storage tanks serve as a staging area to collect crude oil in several stages of production. These tanks are used in production fields and hold the oil until it is delivered to tankers or into a pipeline. Storage tanks are also used as a holding area for crude oil before the refining process and […]

Read More
Coalescing filters

How does a coalescing filter work?

By Tiffanie Gupton / November 20, 2019 / 0 Comments

What is a coalescing filter?   Coalescing filtration or Coalescing gas separators are designed specifically for the removal of mist, fogs, and dust from gas streams. These contaminants usually exist with the bulk of the particles having diameters considerably less than 10 microns; therefore, standard separators or scrubbers are not capable of effectively removing these minute […]

Read More
Coalescing gas separator

What is a coalescing filter?

By Tiffanie Gupton / November 15, 2019 / 0 Comments

Coalescing gas separators (or coalescing separators) are designed specifically for the removal of mist, fogs, and dust from gas streams. Standard separators cannot remove these small, minute contaminants in the gas stream because particles are usually less than 10 microns.  A coalescing gas separator consist of a vessel, combining specially constructed coalescing elements and a […]

Read More

Partner Spotlight: Genis Holdings, LLC

By Tiffanie Gupton / November 12, 2019 / 0 Comments

Croft Production Systems, Inc. is excited to announce that we are now an authorized dealer for Genis Holdings, LLC for the Aeris Gas Cooler, a gas-powered air cooler. Genis and PC3 Technologies, LLC were established in 2017 to find ways for to improve an industry that had not seen many changes in over 50 years, specifically on […]

Read More

Winterizing your processing equipment

By Tiffanie Gupton / November 1, 2019 / 0 Comments

How to prepare oil and gas processing for winter Why is winter hard on production and processing? Two words; hydrate formations. Hydrates are crystals formed when water and gas are combined in a low temperature and high-pressure environment. They become more prevalent during colder ambient temperatures. During the colder ambient temperatures, water vapor will begin to condense which can cause […]

Read More

How does a separator work in oil and gas?

By Tiffanie Gupton / October 14, 2019 / 0 Comments

A separator is a mechanical device for removing and collecting liquids from natural gas. Read our blog on What is a Separator? to learn more about the specific applications for a separator. Now, let’s dive in on the specifics of how a separator works and understanding the process a little more in-depth. The Separation Process: All separators […]

Read More

What is a separator?

By Tiffanie Gupton / October 9, 2019 / 0 Comments

An oil and gas separator is used for removing and collecting liquids from natural gas. A properly designed separator will also provide the release of entrained gases from the accumulated hydrocarbon liquids. These separators can go by many names or different purposes like liquid separators, oil separators, water and oil separators, etc., but the most […]

Read More
Croft Bullet Tank

Bullet Tank Features with Eric Orellana

By Tiffanie Gupton / June 27, 2019 / 0 Comments

Engineer, Eric Orellana, talks about bullet tanks, their features and NGL recovery.  Read more about CROFT bullet tanks and their features. What is a Bullet Tank? Transcription Hi, my name is Eric Orellana, I’m an engineer here at Croft Production Systems. Today I’ll be talking to you about bullet tanks and some of their features. […]

Read More

TEG Cleanout Utilizing Mobile PDS

By Croft Productions / May 8, 2019 / 0 Comments

Do you dread the anticipation of having to clean out your TEG? Having to shut down your operation for a few weeks? Here at CROFT we offer a mobile Passive Dehydration System. It is a quick, easy and a temporary way to bypass a TEG and continue to dehydrate the gas while your TEG is […]

Read More

CROFT’s TEG design & TEG Components

By Croft Productions / April 23, 2019 / 0 Comments

What is A teg Unit? Triethylene glycol (TEG) is a liquid desiccant system used for the removal of water from natural gas and NGLs. It is the most commonly used means of water removal from natural gas. A TEG Unit also referred to as a glycol unit, uses absorption, which occurs when the water vapor […]

Read More
EcoVapor Equip

Partner Spotlight: EcoVapor Recovery Systems

By Tiffanie Gupton / April 3, 2019 / 0 Comments

We are excited to spotlight one of our partners, EcoVapor Recovery Systems. CROFT values this relationship because EcoVapor’s dedication matches CROFT’s commitment to environmental controls. EcoVapor Recovery Systems helps its clients achieve a ZERO Emissions facility while improving free cash flow and site safety. With their extensive expertise in tank vapor management and vapor recovery systems, […]

Read More

Bullet Tank Safety Features

By Croft Productions / March 26, 2019 / 0 Comments

There are many guidelines that our industry must follow to ensure there is a safe environment for everyone. At CROFT, we follow the same standard and safety guidelines for all of our equipment and bullet tanks are no exception.  Last week we told you what a bullet tank was and what it is used for. […]

Read More

What is a Bullet Tank?

By Croft Productions / March 15, 2019 / 0 Comments

A bullet tank is a storage container that houses natural gas liquids (NGLs). The tanks come in many different sizes and include accessories that best suit your operation. Bullet tanks range from 6,000 to 30,000 gallons, with an 18,000-gallon tank being the most common size. Tanks should be no more than 70-80% full in order for […]

Read More

Field Trip: Measuring Water Vapor

By Tiffanie Gupton / December 20, 2018 / 0 Comments

 Service Lead, Eric Gorka, takes us on our first Field Trip and shows us how to Measure Water Vapor.  To properly measure water vapor, you will need the following tools: Gas Detection Tubes/Colorimetric tubes  Puller The gas bulb of hard plastic or stainless steel How to measure: Install bulb Purge bulb Break each end of the […]

Read More

CROFT’s JT System Product Information

By Tiffanie Gupton / December 3, 2018 / 0 Comments

JT systems are primarily used for NGL recovery, dew point specification for pipeline spec, and the reduction of the BTUs of the natural gas for natural gas-powered engines.

Read More
Do NOT follow this link or you will be banned from the site!
Scroll to Top